[toc]
TwinCapture Upload finishes an upload that the CupixCapture mobile app started. You capture on the phone and the app sends the capture data; this card sends the image files, which are much larger.
1. Choose Method: camera or folder
| Choice | When to use it |
|---|---|
| 360° Camera | The camera is connected to this computer by USB, and CupixConnect reads it directly. |
| Folder | The files are already copied onto this computer, or are on an SD card in a reader. |
If the camera is not detected
If you choose 360° Camera and CupixConnect cannot see one, Camera Not Detected opens. Choose your camera make (Insta360 or Ricoh) for the steps to put the camera in the right USB mode, then click Retry.
2. Select Folder (Folder only)
If you chose Folder, the Select Folder step opens. Insert the SD card, or connect the camera to the computer's USB port, then click Change Folder and choose the folder that holds the 360° video or photo files. With 360° Camera, this step is skipped and CupixConnect goes straight to Upload.
3. Review and upload
The last step lists what will be uploaded, grouped by workspace, project and capture date, with who captured it. Each row is a capture with Files, Level and Status. For a 5.0 project the table also shows a Site / Building column; long building names are shortened in the middle, and pointing at one shows the full name.
| Status | Meaning |
|---|---|
| Ready to upload | Every file this capture needs was found. |
| 1 file missing (or more) | The capture lists a file that is not in the folder or on the camera you chose. |
- Captured by switches between Me and All Members.
- Check Server refreshes the capture data from CupixWorks.
- If nothing is ready, a red banner says the files could not be found. Go back and choose the other camera or folder.
Click Upload. Keep CupixConnect open until Upload Complete! appears, then click Done. Stop Uploading cancels. An interrupted upload resumes from History.