[toc]
Settings, on the left toolbar, turns layers on and off and sets how they look. To cut the 3D map down to one part, see SmartFilter.
Settings controls what is drawn in the viewport and on the plan. It is the answer to most why can't I see... questions in SiteView.
Opening Settings
Click Settings at the bottom of the left toolbar. The panel lists the categories in up to four groups, and the group tells you what kind of thing you are switching on. Dormitory B, L4 shows seven categories in four groups; a level with less set up shows fewer.
Click a category to open it.
- Settings - opens the panel.
- Markups - SpatialNotes and Measurements.
- Designs - Reference Plans.
- Reality Captures - Pano Bubbles and 3D Maps.
- Others - Public Share and Integrations.
The twelve categories
| Group | Category | What it controls | Appears when |
|---|---|---|---|
| Markups | SpatialNotes | Whether note pins are drawn, and on which surfaces | Always |
| Measurements | Whether saved measurements are drawn | Always | |
| Designs | Reference Plans | Which plan is shown, its opacity, its colour, and which level it is pinned to | A plan has been uploaded |
| Work Areas | Whether work-area boundaries are drawn | Work areas have been set up | |
| Grid Lines | Whether the structural grid is drawn | A grid has been defined | |
| Reality Captures | Pano Bubbles | Whether waypoint markers are drawn, and how | Always |
| 3D Maps | How the 3D data is rendered | 3D data has been processed | |
| Orthomosaic Images | The flat drone image layer, with an opacity control | Drone data exists | |
| Ground Control Points | GCP markers | Drone data with GCPs exists | |
| Flight Path | The path the drone flew | Drone data exists | |
| Others | Public Share | The share link for this view, and who can reach it | Always |
| Integrations | Layers from connected third-party tools | An integration is connected |
Why your list is shorter
You will rarely see all twelve. A category appears only when the project has the data behind it: no work areas, no Work Areas category; no drone data, no Orthomosaic Images, Ground Control Points or Flight Path.
Two projects, two lists. A building project with no drone data and no work areas shows six: SpatialNotes, Reference Plans, Pano Bubbles, 3D Maps, Public Share, Integrations. A drone project shows a different six: Reference Plans, 3D Maps, Orthomosaic Images, Flight Path, Public Share, Integrations. Neither is missing anything.
Inside a category
Most categories are a switch and a control or two: a slider for size or opacity, a colour, a list to pick which item to show. Pano Bubbles is a typical one:
| Control | What it does |
|---|---|
| Show on 2D Viewer | Draw the bubbles on the map and the reference plan |
| Show on 3D Viewer | Draw them in the 360 photo and the 3D map |
| Radius | How big they are |
| Stand Length | How far above the floor they stand |
| Project to the ground | Drop them onto the floor |
| Reset | Put this category back to its defaults |
Reference Plans is the largest category: it picks the plan, sets its opacity and colour, and chooses which level it belongs to.
- Back - returns to the category list.
- Show on 2D / 3D Viewer - draw bubbles on the map and plan, in the tour and dollhouse, or both.
- Radius, Stand Length, Project to the ground - bubble size, how high it floats, and whether it sits on the floor.
- Reset - back to the defaults.
- The bubbles in the dollhouse - drawn because Show on 3D Viewer is on. Each dot is one capture point; Stand Length lifts it above the floor.
3D Maps - rendering style
3D Maps sets how the 3D map is drawn, in aerial mode and in the 3D Map view of first-person mode.
| Control | What it does |
|---|---|
| Rendering Style | RGB Point Cloud (the captured points in their own colours), Textured Mesh (a solid surface with the photos on it), Elevation Heatmap (points coloured by height) or X-Ray (a see-through look, with a Visual Preset and parameters) |
| Opacity | How solid the 3D map is drawn |
| Point Limit per Frame | How many points are drawn at once, up to several million. Lower it if the 3D map is slow on your computer |
| Point Size | Adaptive sizes points by distance; Fixed keeps them one size |
| Hide surfaces facing the camera | Hides the side of the model nearest you, so you can see into a room from outside |
| Reset | Puts this style's settings back. It does not change the style |
- Rendering Style - set to Elevation Heatmap here; choose RGB Point Cloud for true colour.
- Opacity - fades the point cloud.
- Point Limit per Frame - how many points are drawn at once; lower it if the view is slow.
- Point Size - Adaptive changes with distance, Fixed keeps one size.
- Hide surfaces facing the camera - clears the near wall so you can see inside.
- Reset - back to the defaults.
- The 3D map - redrawn at once in the chosen style. In Elevation Heatmap, colour shows height, so floors, ceilings and level changes stand apart.
What Settings does not do
| To | Go to |
|---|---|
| Connect an integration | The Integrations articles. Settings only turns an already-connected layer on and off |
| Set up work areas, grids or reference plans | Project administration, in the Project Admin Center. Settings only shows what already exists |
Changes from 4.0
| In 4.0 | In 5.0 |
|---|---|
| Rendering Style in 3D Display Settings | Rendering Style under Settings > 3D Maps, with X-Ray added |
| Plan Viewer, a floating window in the Capture Viewer | Settings > Reference Plans, and the floor plan inset |
Next: Capture Intelligence - the AI summary of each capture.