[toc]
Introduction
Drone Capture processes drone-captured imagery into georeferenced aerial datasets within CupixWorks, enabling consistent spatial alignment across drone, 360°, and BIM data.
Through an integrated workflow across CupixConnect, Drone Capture Editor, and SiteView, users can generate, publish, and visualize aerial maps to support site verification, progress tracking, and project coordination.
Note: Drone Capture is available with a Unified license only.
Permissions Overview
Access to drone capture features depends on the user’s project role and workspace permissions. The table below summarizes available actions for each role.
| Phase | Tool | Role Requirement | Description |
|---|---|---|---|
| Upload | CupixConnect | Project Member or higher | Upload drone images and create aerial map entries for processing. |
| Edit | Drone Capture Editor | Project Admin or higher | Review processed results, verify GCP accuracy, take measurements, adjust the vertical (Z) offset, and publish selected data types (Ortho, DSM, Point Cloud, Mesh) to SiteView. |
| Visualize | SiteView | Users with SiteView access | View published aerial maps in SiteView using Compare and standard features such as SpatialNotes, Measurements, and Bookmarks. (Refer to the Permission Overview article for details on access permissions for each feature.) |
Workflow Overview
The drone capture workflow includes three main phases:
1. Upload
Import drone images through CupixConnect for cloud processing. During upload, you can optionally define a Coordinate Reference System (CRS) and add Ground Control Points (GCPs) to improve georeferencing accuracy for civil and survey workflows.
Note: Available to Project Members or higher
Note: Drone Photo Upload is available in CupixConnect version 4.6.4 and later.
2. Edit and Publish
Review processing results, verify GCP accuracy and RMS error, take measurements, compare with BIM, visualize 3D flight paths, adjust the vertical (Z) offset, and publish the aerial map in the Drone Capture Editor.
Note: Available to Project Admins or higher
3. Visualize
View published aerial maps in SiteView for 2D and 3D analysis with other project data by using Compare, and use standard SiteView features such as SpatialNotes, Measurements, and Bookmarks. (Accessible to users with SiteView access)
Upload Drone Images
Drone images are uploaded and processed in CupixConnect to generate aerial maps.
Capture Modes
- Nadir - Images captured vertically (camera facing downward). Ideal for Orthomosaic and DSM outputs.
- Oblique - Images captured at an angle to capture façades and vertical structures. Recommended for 3D outputs such as point cloud or mesh.
Output Types
Up to four types of results can be generated:
| Type | Description |
|---|---|
| Ortho (Orthomosaic) | A georeferenced 2D aerial image, corrected for distortion and scale. |
| DSM (Digital Surface Model) | A height map representing terrain and surface elevations. |
| Point Cloud | A 3D point-based reconstruction of the site. |
| Mesh | A 3D textured surface providing realistic context and visualization. |
Note: For detailed upload steps and image requirements, see the Upload drone photos with CupixConnect article.
Edit and Publish in Drone Capture Editor
After processing, the aerial map becomes available in the Drone Capture Editor, where you can:
- Review data quality - Verify the accuracy and completeness of processed results in 2D or 3D.
- Review GCP accuracy - If Ground Control Points were provided during upload, verify the RMS error for each GCP and review matched drone images before publishing.
- Measure and validate - Use measurement tools (distance, area, volume, angle, and more) to verify spatial accuracy of processing results before publishing.
- Compare with BIM - Enable BIM Compare to view the BIM model alongside the aerial map for side-by-side verification in 2D and 3D.
- Visualize 3D flight path - Review the drone’s flight trajectory, camera positions, and camera orientation in 3D to assess capture coverage and diagnose quality issues.
- Adjust vertical (Z) offset - Align the aerial map with other datasets in the project.
- Select output types to publish - Choose which data types (Ortho, DSM, Point Cloud, Mesh) will be available in SiteView.
Note: Only published aerial maps appear in SiteView. For details on reviewing and publishing maps, see the Drone Capture Editor article.
Open the Editor from the project's Captures page: click the drone capture, then Open in Editor. See Drone Capture Editor.
View in SiteView
Published drone captures open in SiteView in 2D and 3D, next to your other project data, with Compare, SpatialNotes, Measure and Bookmarks. See Drone captures - view the site from above.