[toc]
In the CupixWorks 5.0 Private Beta, your team tries 5.0 on your own live projects, not on a sandbox. Your team keeps working in 4.0 as usual, and you can open the same workspace in 5.0 whenever you want. This article explains how the two versions work together, what you can do where, and what to send your CSM to get started.
One workspace, two versions
Your CSM sets up one workspace of your team to open in both CupixWorks 4.0 and 5.0. Both versions read and write the same live data:
- Nothing is copied, migrated or re-uploaded.
- A change you make in one version shows in the other right away.
- 5.0 cannot change the structure of your current projects, so 4.0 keeps working exactly as before.
- Your other workspaces stay in 4.0 only.
- Everyone with access to the shared workspace can use 5.0. There is no list of beta users and no setup per person.
Switching between 4.0 and 5.0
- Sign in as usual. Your workspace opens in 4.0, as it does today.
- To switch, click Open in v5. In 4.0 the shared workspace carries a v5 available badge. You find Open in v5 in the panel on the right when you select that workspace, on the Private Beta banner inside it, in a project's detail panel and on a project card on the map. 5.0 opens in a new tab.
- To go back, click Open in v4 on the banner at the top of the 5.0 screen. 4.0 opens in a new tab.
- a v5 available - this workspace also opens in 5.0.
- b Open in v5 - opens the same workspace in 5.0, in a new tab.
- a Banner - this project is shared with 4.0, so a change made here also shows in 4.0.
- b Open in v4 - opens the same screen in 4.0, in a new tab.
Which version opens when you sign in. After you have switched once, your next sign-in opens the version you used last. That choice is remembered by your browser, so a new computer, a different browser, a private window or a cleared cache opens 4.0 again. Opening a project from the 4.0 list always opens 4.0.
The banners in 5.0
Screens that 5.0 shares with 4.0 carry a one-line banner, so you always know that a change there also applies in 4.0:
| Where | Banner |
|---|---|
| A project shared with 4.0 | This project is shared with CupixWorks v4 |
| The shared workspace (Projects, Configuration) | This workspace includes projects shared with CupixWorks v4 |
| Team screens | This team includes workspaces shared with CupixWorks v4 |
| Personal Settings | Your account settings are shared with CupixWorks v4 |
Each banner has Open in v4, which opens the same screen in 4.0 in a new tab. A Fresh Start project has no banner, because it does not open in 4.0.
Three kinds of project in the beta
| Project | What it is | Where it opens |
|---|---|---|
| Current projects | The projects your team already runs. Shared live with 4.0. | 4.0 and 5.0 |
| AI-enabled project (one) | One current project you choose for the AI features. Also shared with 4.0. | 4.0 and 5.0 |
| Fresh Start project (optional) | A new project in the same workspace, made in 5.0 to test the full 5.0 setup: several buildings in one project, and AssetAtlas. Talk to your CSM before you set one up. | 5.0 only. In 4.0 it shows in the list with a v5 only badge. |
- a v5 only - a Fresh Start project, made in 5.0.
- a v5 only - the project is listed in 4.0 too.
- b Point at the badge to see Created in CupixWorks v5. Not visible in v4. Open it with Open SiteView or Open Project Admin Center, which take you to 5.0.
What works where
SiteView, AI and notes
| Current projects | AI-enabled project | Fresh Start project | |
|---|---|---|---|
| New SiteView, notes, measurements | Yes | Yes | Yes |
| Compass, Capture Intelligence, SmartFilter | No (AI not enabled) | Yes, once AI is on | Only if AI-enabled |
| BIM Timeline (in BIM Compare) | SiteInsights projects | SiteInsights projects | To be confirmed |
| Custom SiteViews: add, duplicate | In 4.0 | In 4.0 | Yes |
| Note status sets | Default set only | Default set only | Default set only |
| Tags on FormNotes | Coming soon | Coming soon | Coming soon |
| BIM categories, work area types | Coming soon | Coming soon | Coming soon |
Every status set has three stages: Initiation, Execution and Finalization. During the beta, notes and assets use the team's Default status set. In a project shared with 4.0 you can pick only Open (Initiation) or Resolved (Finalization), the two states 4.0 knows; the Execution stage shows Can't use this stage in projects also used in v4. In a Fresh Start project the Execution stage shows Coming soon. FormNotes cannot be tagged in any project during the beta; PhotoNotes and VoiceNotes can. Status sets are team-wide and shared with every 4.0 workspace, so during the beta they cannot be added, edited, duplicated or deleted in 5.0, in any project. BIM Timeline uses the same schedule as SiteInsights; progress rates stay in SiteInsights.
Project setup
| Current projects | AI-enabled project | Fresh Start project | |
|---|---|---|---|
| Buildings, levels, coordinates | View only; edit in 4.0 | View only; edit in 4.0 | Yes |
| Upload files on the Captures page | Yes (Main Building, 4.0 level) | Yes (Main Building, 4.0 level) | Yes |
| Library uploads, drawing and BIM editors | In 4.0 | In 4.0 | Yes |
| Work areas: add, edit, group | In 4.0 only | In 4.0 only | Yes, without types |
| Capture and drone capture editors | Open the 4.0 editor | Open the 4.0 editor | Yes |
| Several buildings in one project, AssetAtlas | No | No | Yes |
In current projects the Work Areas page does not open in 5.0; add, edit and group work areas in 4.0. When you upload files on the Captures page of a project shared with 4.0, the building is fixed to Main Building and you pick one of the 4.0 levels.
In Project Analytics, a project shared with 4.0 opens the FormNote Report; the other reports show This report will be available in a later release. Team and Workspace Analytics, and DeltaBIM, are coming soon.
When something is not available
Anything 5.0 cannot do in a shared project tells you why, in one of three ways:
| Message | What it means | What you can do |
|---|---|---|
| Available in CupixWorks v4 | The change would affect 4.0, so it is made in 4.0. | Open in v4 takes you to the same place in 4.0. |
| Available in projects created in v5 | The feature needs a project made in 5.0, such as AssetAtlas. | Try it in a Fresh Start project. |
| Coming soon | The feature arrives in a later release. | Nothing to do for now. |
- a Available in CupixWorks v4 - the change is made in 4.0. Open in v4 takes you to the same place in 4.0; Cancel keeps you in 5.0.
AI features
The AI features work only in the one AI-enabled project you choose. When AI is turned on, the captures from the month before are processed, and every capture uploaded after that is processed as it comes in. Older captures are not processed. Other projects open in 5.0 as usual, without AI features during the beta.
| Feature | What you can do |
|---|---|
| Compass | Ask questions about the project in plain words, with answers that link to the captures. |
| Capture Intelligence | Read what each capture shows, in words, without opening every capture. |
| SmartFilter | Show only the building elements you need, such as walls, pipes or equipment, in the 3D dollhouse. |
Capturing and field notes
- Keep uploading captures to your current projects as you do today.
- For a Fresh Start project, use the 5.0 CupixCapture app.
- CupixField works on the same projects, for notes from the field.
Getting started: what to send your CSM
| Item | What to send | Good to know |
|---|---|---|
| Team | Team name, region and team URL | The CupixWorks team joining the beta. |
| Shared workspace | Workspace name and URL | One per team. It opens in both 4.0 and 5.0 on the same data. |
| SiteInsights | Yes or no, for that workspace | Needed for BIM Timeline. |
| AI-enabled project | Project name and URL | One project. AI features work only here. |
| Fresh Start (optional) | Planned or not | Talk to your CSM before you set it up. |
No user list and no extra license are needed. Next steps: kickoff, workspace ready, hands-on, wrap-up. Your CSM shares the dates at kickoff.
Questions teams ask
Will my team notice anything?
No. They can keep working in 4.0 as usual.
Is our data safe?
Nothing is copied or migrated, and 5.0 cannot change the structure of your current projects.
Can we go back to 4.0?
Any time. Click Open in v4 on the banner.
Does it cost anything?
No. The beta runs on your existing license.
What about people we invite?
They start in 4.0, like everyone. Once they have access to the shared workspace, they can open 5.0 with Open in v5.
How do I report issues or suggestions?
The reporting channel will be announced before the beta starts.
New names in 5.0 are listed in CupixWorks 4.0 and 5.0 names.