[toc]
A drawing file (DWG, PDF, PNG, JPEG or TIFF) is not shown anywhere when you upload it. In the Library it reads Awaiting extraction. You choose which pages or layouts become drawings, and each one you extract becomes a Design Reference (DR) you can align and mount.
A 3D BIM file skips this step: see 3D BIM.
Open the file in its editor
- Open Project Admin Center > Library and check that the file shows Ready.
- Select the file. Its details open on the right.
- Click Open in Editor at the bottom of the panel. The drawing editor opens in a new tab, on its Source tab.
Extract a drawing from a PDF or image
- On the left, open the Source tab (a). It lists the file's pages, each with a count of the drawings taken from it.
- Select a page (b).
- Click + Extract Drawing (DR) on the right (c), or the page's +.
- Source - the file's pages. DRs lists what has been extracted so far.
- p.1 - Page 1 - one page, with 0 DRs. Its + also extracts it.
- + Extract Drawing (DR) - turns the selected page into a drawing.
- The new drawing appears under its page (a), in Draft and Not mounted. The right panel switches to it and shows the next step (b).
- Click Save. The editor keeps nothing until you save.
- Page 1 - the new drawing, under the page it came from: Draft, Not mounted.
- Status - Draft, Aligned, Activated. Next: finish alignment; Open Alignment tab starts it.
One page gives one drawing, so a nine-page plan set gives nine. Extract only the pages you need; you can come back for more with Extract DRs... in the file's Library menu. PNG, JPEG and TIFF images open in the same editor and are extracted the same way.
Extract a drawing from a DWG
A DWG file lists its Model Space and, if the file has layout sheets, each one under Paper Space. It also has a Layers (DWG) panel, so you decide which layers reach the apps.
- Source - the file's own structure. DRs lists the drawings taken from it so far.
- Model Space - the 2D view of the model. A file with layout sheets also lists each one under Paper Space.
- + - creates a drawing from that container.
- Layers (DWG) - every layer in the file. Before extraction the switches are greyed out.
- Source container - the selected container's type, name, model unit, scale and origin.
- Select 2D View under Model Space, or a layout under Paper Space if the file has one.
- Click its +. A new drawing appears under it in Draft, Not mounted.
- In Layers (DWG), turn Publish off for layers you do not want in the apps. Show only hides a layer while you work.
- Click Save.
- The new drawing - named after its container, in Draft and not mounted.
- Show, Default, Publish - per layer. All layers start published.
- Status - the next step is alignment. Open Alignment tab starts it.
- Close and Save - Save keeps the new drawing and its layer choices.
Every extracted drawing starts in Draft. It needs to be aligned before it can be mounted.
Next: 3D BIM - what a model brings in. Only drawings in this project? Go to Align Design References.